16-19+ Camaro Sparkmax Ignition System Voltage Booster V2 - JPS Chip and Performance

SKU:
P2100
$419.00
Write a Review

Fits 2016+ Camaro All Models
made-in-usa1.png

PowerMAX v2 • SparkMAX 25V or 31V • Universal Splice-In Ignition Booster 

Double the output of your ignition system.

Eliminate spark-blow-out and run a wider gap on your spark-plug.

Use PowerMAX v2 to quickly and easily increase the output of your ignition system!

PowerMAX Version 2 upgrades include: New Case Higher Output & More Features!!

PM-2100 boosts & regulates the igntion voltage to 14.4v all of the time. 

Designed to be activated at Wide Open Throttle. 

  • Simple installation: PowerMAX splices into your existing ignition coil +12V DC feed wire.
  • Compatible with all 12V or 16V battery systems
  • Works on all Coil on Plug igntion systems.
  • Eliminate Spark-Blow-Out
  • Enjoy smooth acceleration and increased economy.
  • High Quality User Adjustable Hobbs Switch: Preset @ 5psi User Adjustable from 3psi to 7psi
  • Adjustable Voltage Ramp In / Ramp Out • Choose a Time Ramp or from a monitored 0-5v sensor
  • Green Status LED: Know at a glance what the unit is doing.  
  • Blinking LED = Boosting Voltage
  • Optional Remote Voltage Control Knob: Over-Ride the voltage output when the knob is connected (PM-2999)
  • Enable Voltage Boosting with Ground or via a monitored 0-5v external sensor.

Each PowerMAX v2 Kit Contains: 44 Amp PowerMAX V2 Voltage Booster Wiring Harness Installation Kit Set of Instructions

 Installation Kit Contains: 1 - Hobbs Switch Preset @ 5psi (user adjustable 3-7psi) 1 - Fitting 1/8npt Female to 3/16" Male Barb 1 - Vacuum Tee 3/16" x 3/16" x 3/16" 1 - Vacuum Tee 1/4" x 1/4" x 3/16" 1 - Vacuum Tee 3/8" x 3/8" x 3/16" 1 Foot of 5/32" vacuum hose 1 - 30amp mini-fuse solder 2 - 10/12gauge Heat Shrink Butt Splices 2 - #8 stud 18/22 gauge wire Heat Shrink Ring Terminal 1 - 10 gauge Heat Shrink Ring Terminal 6 - Zip Ties 6 - Self drilling hex screws mini screw-driver

Download the Product Installation Instructions
Download the Product Technical Information Sheet
Download the JMS Product Catalog

 SparkMAX V1 Installation:

  

Using SparkMAX to solve spark blow-out:

  

Width:
3.00 (in)
Height:
2.00 (in)
Depth:
2.00 (in)