These 2016-18 Camaro stripes are full length bumper to bumper dual stripes. These stripes are similar to our standard stripes except they have a pre-installed gap and pinstripe on both outside edges. The pinstripe is the same color as the main stripe. These stripes have a 1 inch gap between the two stripes and taper to fit the shape of the hood. Stripes are precut to length and shape. They require removing the hood vents for stripe installation on SS Camaros, so you will not have any gap between the stripe and vent. Also requires removing the rear bowtie emblem, which can be reinstalled after stripes or left off. You have the option of adding a pinstripe ($10 extra) or no pinstripe. The kit includes extra pinstripe and the pinstripe will need to be cut to length. Enough pinstripe is included to do both outside edges with some extra. They will not fit aftermarket hoods. Will not fit ZL1 or 2019-20 Camaros.
We also have a "unlisted spoiler" option for spoilers not pictured or listed (for SS, LS or LT). This option includes the trunk sections from the no spoiler kit (may need trimming to fit) and a foot of stripe material. The stripes will have to be trimmed to fit your spoiler. This makes the install more difficult but would be the only option. Be sure to email or call us before ordering if you have any questions on which kit you need to fit your car correctly.
All stripe kits use high quality vinyl - Hexis, KPMF, Avery or 3M depending on which color is selected. All vinyl has an air release backing, UV protection and pressure sensitive adhesive for an easier install and long life.