16-24 Camaro 1" Extended Wheel Stud Kit (Includes 5 Studs) - ARP

FITS 2016-2024 CAMARO ( ALL MODELS )

DESCRIPTION:

Upgrade the wheel retention strength and safety of your 2016-2024 Chevrolet Camaro with the ARP 1-Inch Extended Wheel Stud Kit featuring Part Number 100-7737. Designed for high-performance street, drag racing, autocross, road-course, and competition applications, these professional-grade press-in wheel studs are manufactured from heat-treated 8740 chromoly steel and nominally rated at 190,000 PSI tensile strength. Each stud features an M14 x 1.50 right-hand thread and provides approximately 1 inch of additional length over the factory Camaro wheel studs, making this kit ideal for vehicles equipped with wheel spacers, thicker aftermarket wheels, open-ended lug nuts, or track-oriented wheel and tire combinations requiring increased thread engagement. The quick-start nose design helps simplify lug nut installation and reduces the chance of cross-threading during rapid wheel changes, while the cadmium-plated gold finish adds corrosion resistance and long-term durability. Sold as a package of five studs, the ARP 100-7737 Extended Wheel Stud Kit can be installed on the front or rear of compatible sixth-generation Camaros and provides the strength and dependability expected from Automotive Racing Products.

Key Features

• ARP Automotive Racing Products Extended Wheel Stud Kit
• Part Number 100-7737
• Fits 2016-2024 Chevrolet Camaro applications
• Suitable for front or rear installation
• Includes five wheel studs
• Approximately 1 inch longer than the factory wheel studs
• Press-in wheel stud design
• M14 x 1.50 right-hand thread
• Underhead length: Approximately 3.192 inches / 81.08mm
• Knurl diameter: Approximately 0.625 inches / 15.88mm
• Knurl length: Approximately 0.341 inches / 8.66mm
• Heat-treated 8740 chromoly steel construction
• Nominal tensile strength rating: 190,000 PSI
• Cadmium-plated gold finish for increased durability and corrosion resistance
• Quick-start nose simplifies lug nut engagement
• Increased thread engagement for added wheel retention security
• Designed to withstand high acceleration shock loads and lateral cornering forces
• Ideal for wheel spacers, thicker aftermarket wheels, open-ended lug nuts, and competition applications
• Direct press-in installation with no drilling required
• Made in the USA

Important Notes

• Fits compatible 2016-2024 Chevrolet Camaro models. Confirm the factory hub and stud dimensions before installation, as some third-party catalogs list a narrower model-year range for this part number.
• Includes five wheel studs, which is enough to service one wheel.
• Four packages are required to replace all 20 wheel studs on one Camaro.
• Lug nuts are not included.
• Open-ended M14 x 1.50 lug nuts are recommended and may be required because the studs extend approximately 1 inch beyond the factory length.
• These are press-in wheel studs and require removal of the factory studs.
• The specified knurl diameter is approximately 0.625 inches / 15.88mm.
• Confirm hub bore, knurl diameter, wheel thickness, spacer thickness, and available clearance before installation.
• Proper press-in installation is essential to prevent damage to the wheel hub or stud knurl.
• Professional installation using the correct wheel-stud removal and installation equipment is recommended.
• Verify that each stud is fully seated against the rear of the hub before installing the wheel.
• Torque the lug nuts to the vehicle or wheel manufacturer's specifications and recheck the torque after the first 50-100 miles.
• Cadmium-plated automotive components may carry a California Proposition 65 warning.

California Residents Only: ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov