16-24 Camaro Smoked LED Side Marker Kit - Diode Dynamics

Name: 16-24 Camaro Smoked LED Side Marker Kit - Diode Dynamics
Brand: Diode Dynamics
SKU: DD5063
Price: 199.95 USD
Availability: InStock

FITS 2016-2024 CAMARO ( ALL MODELS )

DESCRIPTION:

Upgrade the exterior lighting and appearance of your 2016-2024 Chevrolet Camaro with the Diode Dynamics DD5063 Smoked LED Side Marker Kit. Designed as a direct replacement for the factory front and rear side markers, this complete four-piece kit adds a darker smoked-lens appearance while replacing the original bulb-style lighting with full LED illumination. Each DD5063 kit includes four complete LED side marker assemblies to replace both front and both rear factory markers. The front assemblies illuminate bright amber, while the rear assemblies illuminate red, retaining the proper front-to-rear lighting colors even though the lenses themselves have a smoked appearance. Rather than using a single bulb or concentrated LED point, Diode Dynamics loads the housings with a large LED array to create a more modern, uniform appearance. The manufacturer states that the complete LED array also provides greater output than the factory Camaro side markers. One of the most important differences between the Diode Dynamics design and many inexpensive aftermarket side markers is its use of OEM-grade retroreflector optics. These optics provide reflective properties even when the lights are switched off while also creating a cleaner, factory-style appearance. Diode Dynamics confirms that even the smoked version retains reflective properties when unlit. Fitment is engineered from OEM CAD data rather than using a generic housing. The assemblies are designed to fit directly into the original Camaro side-marker locations and connect to the factory wiring through OEM-size plug-and-play connectors. No wiring modifications, resistors, or permanent vehicle modifications are required. Diode Dynamics incorporates internal constant-current circuitry and transient-voltage protection into the DD5063 assemblies. These electrical protections are similar to technologies used in OEM lighting components and are designed to help maintain consistent LED output and reliable, flicker-free operation over time. The electrical specifications include a 9-16V operating range, 2.3-watt power rating, approximately 0.18A current draw at 13.2V, and non-polar operation. The housings use an ABS base with PMMA lenses and Mini SMD LED emitters. Diode Dynamics rates the operating-temperature range from -40°C to 85°C (-40°F to 185°F). Installation is straightforward, with Diode Dynamics estimating approximately 10-20 minutes using a basic tool set. No modification is required, and the manufacturer states that wheel removal or lifting the vehicle is generally unnecessary, although removing a wheel can provide additional working room if desired. The DD5063 Smoked LED Side Marker Kit provides an easy way to modernize the sixth-generation Camaro's exterior lighting while maintaining OEM-style fitment and reflector functionality.

Key Features

Diode Dynamics Smoked LED Side Marker Kit
Includes both front side markers
Includes both rear side markers
Smoked lens finish
Full LED construction
Increased output compared with factory side markers
Front markers illuminate bright amber
Rear markers illuminate red
OEM-grade retroreflector optics
Designed directly from OEM CAD data
OEM-style fit and appearance
Plug-and-play electrical connection
No resistor required
Internal constant-current circuitry
Transient-voltage protection
Mini SMD LED emitters
Non-polar electrical design
Estimated installation time: 10-20 minutes
Engineered and assembled in the USA

Important Notes

Diode Dynamics states that the Smoked version may not meet compliance requirements in some regions.
Customers should verify applicable federal, state, and local lighting regulations before installation or road use.
Transient-voltage protection is incorporated into the lighting electronics to help protect the circuit over time.
Electrical operating range is 9-16 volts.
Rated power consumption is 2.3 watts.
Current draw is approximately 0.18 amps at 13.2 volts.
The electrical design is non-polar, simplifying installation.
Housing construction uses an ABS base and PMMA lens.
Diode Dynamics rates operating temperature from -40°C to 85°C (-40°F to 185°F).
No permanent vehicle modification is required.

PRODUCT VIDEO:

Videos

Warranty

All Products: 3-Year Replacement Limited Warranty Diode Dynamics warrants that its products will be free from defects in material and workmanship for a period of three (3) years after the date of purchase, subject to exceptions, limitations, and stipulations. For approved warranty claims, Diode Dynamics will replace the defective product with the same product or, if it has been discontinued, one comparable in performance and value. See exceptions, limitations, and stipulations below. If you have an issue with any product, we will diagnose the issue with you, and you may be required to answer questions or assist in the diagnosis. If Diode Dynamics determines that your product is defective in material or workmanship, Diode Dynamics will issue an RMA number. An RMA number must be issued before any items are returned. U.S. Customers: All initial shipping costs are covered by Diode Dynamics. In most cases, you will immediately receive the new products with a return label. However, in some cases, you may need to use a provided return label to send back items first. Diode Dynamics will provide one free return label per order. You may return any number of items from the order in one box using the free shipping label. However, you will be responsible for return shipping costs for any other separate returns from the same order. International Customers: For all warranty orders over $200, defective products must be returned before a replacement can be sent. You are responsible for return shipping costs for all warranty claims with retail value of over $200. If you are required to ship your item back for warranty purposes, Diode Dynamics will then cover shipping costs for the replacement items being shipped to you. All warranty orders valued under $200 will be replaced immediately, and you will be responsible for the shipping costs of the replacement. Select Products: 8-Year Limited Warranty In addition to the above 3-Year Replacement Limited Warranty, Diode Dynamics carries an 8-year Limited Warranty on select products. Currently, this includes and is limited to all Stage Series and Elite Series lamp assemblies and lamp mounting brackets. However, this does not include wiring, wiring harnesses, lens covers, or other accessories that may be used with lamp assemblies. Please reference product detail pages to determine the specific warranty terms of each product. After 3 years of Replacement Limited Warranty, Diode Dynamics will continue to warrant for 5 additional years that select products will be free from defects in material and workmanship, subject to exceptions, limitations, and stipulations. This provides Limited Warranty coverage for a total of 8 years from when the product was purchased. Generally, the 8-Year Limited Warranty only applies to functional and product failure, and does not cover cosmetic characteristics of the product. See exceptions, limitations, and stipulations below. If you have an issue with any product, we will diagnose the issue with you, and you may be required to answer questions or assist in the diagnosis. If Diode Dynamics determines that your product is defective in material or workmanship, Diode Dynamics will issue an RMA number. An RMA number must be issued before any items are returned. If a defect is found beyond the initial 3 years of Replacement Limited Warranty, products must be returned at the customer's expense to Diode Dynamics for inspection, and will be replaced or repaired, at the sole discretion of Diode Dynamics. For U.S. customers, shipping back to the customer will be covered by Diode Dynamics. International customers are responsible for all shipping costs. Select Products: Limited Lifetime Warranty In addition to the above 3-Year and 8-Year Replacement Limited Warranties, Diode Dynamics carries a Lifetime Limited Warranty on select products. Currently, this includes and is limited to SL2 and SL2 Pro LED Bulbs. Please reference product detail pages to determine the specific warranty terms of each product. After 3 years of Replacement Limited Warranty, Diode Dynamics will warrant that select products will be free from defects in material and workmanship, subject to exceptions, limitations, and stipulations. Generally, the Lifetime Limited Warranty only applies to functional and product failure, and does not cover cosmetic characteristics of the product. See exceptions, limitations, and stipulations below. If you have an issue with any product, we will diagnose the issue with you, and you may be required to answer questions or assist in the diagnosis. If Diode Dynamics determines that your product is defective in material or workmanship, Diode Dynamics will issue an RMA number. An RMA number must be issued before any items are returned. If a defect is found beyond the initial 3 years of Replacement Limited Warranty, products must be returned at the customer's expense to Diode Dynamics for inspection, and will be replaced or repaired, at the sole discretion of Diode Dynamics. For U.S. customers, shipping back to the customer will be covered by Diode Dynamics. International customers are responsible for all shipping costs. Exceptions, Limitations, and Stipulations Terms: Warranty terms, policies, and limitations are subject to change without notice. Proof of Purchase: Proof of purchase is required for any warranty request. Transferability: Warranty coverage is extended only to the original purchaser of the products, and is not transferable. If a product is purchased as a gift, the recipient may claim warranty coverage even if they do not have proof of purchase, by registering for warranty within 90 days of the original purchase date. Timing: All warranty coverage periods are based on the number of days between original purchase date from Diode Dynamics or its authorized dealer in good standing, and the date of submission of an RMA Request (warranty service request) by Diode Dynamics. Use: When products are used in a commercial or industrial setting, any warranty coverage exceeding the initial 3-year Limited Replacement Warranty is not valid. This includes, without limitation, construction, mining, manufacturing, forestry, commercial flight, and agriculture. Surface Finish: Many Diode Dynamics products feature treated surfaces, with paint, powdercoating, anodization, UV coating, etc. These coatings, while durable, are not designed to last indefinitely, and wear out over time depending on use. To prolong lifespan, we recommend that products are shielded from UV light when possible, cleaned regularly using mild detergents, and that they are not subjected to abrasives or damage. Surface finishes that wear out from regular wear and tear are not covered under warranty. If damage in coatings appears within the initial 3 Year Replacement Limited Warranty, and is determined to be caused by manufacturing defect, it will be covered or repaired. Surface finish issues are not covered under any other warranty terms, for any reason. Condensation: Certain products from Diode Dynamics contain sealed volumes of air. High-power LEDs create a large amount of heat, so the air expands and contracts as the lamp heats up and cools down. Pressure-equalizing vents are used whenever possible to prevent damage to the seal of the lamp, but this can occasionally introduce moisture in the air, especially with high humidity. Under certain circumstances, condensation may collect on the outside lens of the product, as it is much cooler than the rest of the lamp. This condensation is normal, and not covered under warranty. Condensation can be removed by allowing the lamp to fully warm up, or reducing outside humidity. If moisture buildup becomes greater than simple condensation, this indicates an issue with the product seal, and Diode Dynamics will cover it under warranty, in its sole determination. When making warranty claims for moisture buildup, we encourage you to include photographs showing the extent of the moisture. Components: If a problem exists with a single component, Diode Dynamics may replace only the component needed to restore function. Installation and Labor: Diode Dynamics product warranties are limited to coverage of products only. Diode Dynamics does not warranty or offer compensation or coverage of installation labor or time that may be required for replacement of warranty items. We strongly encourage customers to contact us prior to seeking outside assistance in diagnosis of any product issue. All warranties, expressed or implied, are void if our warranty claim department determines that there is sufficient evidence of one or more of the following: Negligence: Improper installation or improper use, including using or installing any product in a manner not specified by Diode Dynamics, or damage caused by improper installation. Abuse: Damage beyond the limits of "normal wear and tear." Product Modifications or Repair: See below. Unauthorized Dealer Purchase: Purchase of items through any unauthorized party. We encourage you to contact Diode Dynamics prior to purchase to verify the seller is authorized.