16-24 Camaro SS Elite Series Cold Air Intake - Cold Air Inductions

Name: 16-24 Camaro SS Elite Series Cold Air Intake - Cold Air Inductions
Brand: Cold Air Inductions
SKU: 501-1100-B
Price: 399.99 USD
Availability: InStock

FITS 2016-2024 CAMARO ( SS MODELS )
Not for sale or use in California

DESCRIPTION:

Improve airflow, throttle response, and induction sound on your 2016-2024 Chevrolet Camaro SS 6.2L V8 with the Cold Air Inductions 501-1100-B Elite Series Cold Air Intake. Designed specifically for the sixth-generation Camaro 6.2L platform, this dyno-proven intake replaces the restrictive factory air box with a high-flow, heat-resistant system engineered to deliver cooler, denser air to the engine. Cold Air Inductions advertises gains of up to 17 additional rear-wheel horsepower with no aftermarket tune required. The 501-1100-B uses a thermal-coated aluminum intake tube finished in textured black powdercoat. Cold Air Inductions states that the tube is designed to improve laminar airflow while reducing heat soak, helping supply the engine with cooler intake air under performance driving conditions. The system also incorporates a sealed aluminum air box that helps isolate the filter from hot engine-compartment air while drawing in cooler outside air. This enclosed design is intended to improve intake efficiency and responsiveness while maintaining strong protection from underhood heat. A clear inspection window is built into the air-box lid so the filter can be checked without disassembling the intake. Cold Air Inductions equips the 501-1100-B with its reusable CF-7437 high-flow oiled cotton-gauze filter. The manufacturer states that the filter is capable of capturing particles as small as 5 microns while maintaining high airflow. Unlike a disposable paper filter, the CF-7437 can be cleaned and re-oiled for continued use. High-grade silicone couplers and elbows are combined with stainless-steel sealing hardware to create a durable, heat-resistant connection throughout the intake tract. Cold Air Inductions designs these components to meet OEM-style durability requirements while providing the secure sealing needed for consistent airflow and proper engine operation. Installation is designed to remain straightforward. The 501-1100-B is a bolt-on system that Cold Air Inductions says can be installed in less than one hour using basic hand tools. No aftermarket engine calibration is required for the manufacturer's advertised performance configuration. In addition to the performance gains, the intake produces a deeper, more aggressive induction tone under throttle while maintaining normal drivability. Cold Air Inductions designs, engineers, and builds the system in the USA. For 2016-2024 Camaro SS owners looking for a premium aluminum cold air intake without stepping up to the more expensive Elite Carbon Series system, the 501-1100-B delivers a strong combination of dyno-proven performance, enclosed heat management, reusable filtration, straightforward installation, and no-tune-required operation.

Key Features

Cold Air Inductions Elite Series Cold Air Intake
Dyno-proven performance
Up to 17 additional rear-wheel horsepower
Improved throttle response and overall drivability
Deeper, more aggressive induction tone
No aftermarket tune required
Thermal-coated aluminum intake tube
Textured Black powdercoat finish
Designed to improve laminar airflow
Designed to reduce intake heat soak
Sealed aluminum air box
Helps isolate the filter from engine-bay heat
Draws in cooler, denser outside air
Clear air-filter inspection window
Reusable high-flow air filter
Oiled cotton-gauze filter media
Filter can be cleaned and re-oiled
Manufacturer states filtration down to approximately 5 microns
High-grade silicone couplers and elbows
Stainless-steel sealing hardware
Heat-resistant intake connections
Bolt-on installation
Installs in less than one hour
Designed, engineered, and built in the USA

Important Notes

Part Number 501-1100-B is the Elite Series aluminum intake.
The thermal-coated tube is designed to improve laminar airflow and help deliver cooler, denser air to the engine.
A clear inspection window allows the filter to be visually checked without removing the air-box lid.
The included filter is an oiled cotton-gauze design and is reusable.
Cold Air Inductions identifies CF-7437 as the correct replacement filter for the 501-1100-B intake.
The filter can be cleaned and re-oiled rather than discarded at every service interval.
Cold Air Inductions lists RK-0001 as the related air-filter cleaner and recharge kit.
Cold Air Inductions lists the complete system weight at approximately 12 lb.
Check the intake periodically for loose clamps, filter contamination, or damaged couplers as part of routine maintenance.
Cold Air Inductions states that the 501-1100-B is not CARB compliant.
The manufacturer states that the intake is not legal for sale or use in California
The product is not street legal in all 50 states.
Customers should verify applicable federal, state, and local emissions regulations before purchasing or installing the intake.
Cold Air Inductions includes a California Proposition 65 warning with the product.

California Residents Only: ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

PRODUCT VIDEOS:

Warranty

Warrantied products must be registered below. Cold Air Inductions, Inc. offers a lifetime warranty which states all Cold Air Intake systems to be free of defects in materials and workmanship for the lifetime of the product. This Warranty shall not apply to any parts that have been subjected to misuse or improper service, that have been damaged in transit or handling, or that have been altered or repaired by anyone or any company other than Cold Air Inductions, Inc. This Warranty does not cover defects cause by or resulting from misuse, abuse, neglect, acts of God, governmental action or inaction, fires, unavailability of labor, unavailability of materials, unavailability of power, any circumstance beyond Cold Air Inductions, Inc.’s control, and/or damage caused by accident or the failure to provide reasonable and/or necessary maintenance. Any obvious signs of abuse, or any of the aforementioned conditions, will void the warranty in its entirety. This warranty does not cover items that need to be replaced due to normal wear conditions such as the air filter itself, nor does this warranty void, modify, or alter in any way the warranty which is in place with the customer’s vehicle at the time of purchasing products from Cold Air Inductions, Inc. Air filters are not covered by this warranty unless the air filter has a material defect or defect in workmanship, attributable to product and/or services provided to customer by Cold Air Inductions, Inc. Normal wear to filter is not covered under warranty. This Warranty is void if the product or any of its individual components is altered or modified by the purchaser, or if the product is used in a manner or with a vehicle not recommended by the manufacturer. If a Cold Air Inductions, Inc. Cold Air Intake system has a product defect due to material deficiencies or defect or workmanship errors, Cold Air Inductions, Inc. will either replace or repair, at no charge, any parts or components that are found to be defective. Cold Air Inductions, Inc. reserves the right to exclusively decide whether they will replace or repair the unit based off of what is deemed appropriate by a Cold Air Inductions representative. Cold Air Inductions, Inc. shall not be responsible for or obligated to pay for freight or other transportation related costs or expenses in connection with any defective products or components that are returned to Cold Air Inductions, Inc. facility or any replacement products or components that are shipped from Cold Air Inductions pursuant to this Warranty. **Please note that some Cold Air Inductions, Inc. products are NOT C.A.R.B. certified, nor have they been tested or certified for any other emmissions standards. Please double-check in the part description NOTES to see if your item is C.A.R.B. certified or not.**