null
K&N Filters

20-26+ C8 Corvette LT2 Air Intake System - K&N Filters

Write a Review
Ask Questions

20-26+ C8 Corvette LT2 Air Intake System - K&N Filters

$629.99
  • SKU: 63-3120
  • UPC: 024844387998
  • In Stock!
    Current Stock:Only left:
Description

20-26+ C8 Corvette LT2 Air Intake System - K&N Filters

free-shipping-usa.png

FITS 2020+ C8 CORVETTE ( COUPE BASE, Z51 & E-Ray MODELS )
Installation Instructions

DESCRIPTION:

Upgrade the airflow and performance of your 2020-2026 C8 Corvette Stingray LT2 coupe with the K&N 63-3120 63 Series AirCharger Performance Air Intake System. Designed to replace the factory air filter and intake tube, this system combines a rotationally molded high-density polyethylene tube with an oversized K&N High-Flow Air Filter. K&N’s testing on a 2021 Corvette recorded estimated gains of 22.28 horsepower at 5,000 RPM and 16.3 lb-ft of torque, bringing additional performance to the naturally aspirated 6.2L V8. The 63-3120 pairs its black intake tube with a washable and reusable red oiled-cotton filter for continued service. Left and right heat shields with protective heat barriers help separate the filter from engine-compartment heat, while the assembly retains the factory mass airflow sensor and crankcase ventilation connection. Included brackets, coupler, clamps, and mounting hardware support installation using hand tools. The system also delivers a more pronounced intake sound and improved response, complementing the Corvette’s driving experience without requiring routine replacement of its filter element.

Key Features

  • K&N 63 Series AirCharger performance air intake system
  • Engineered to increase horsepower and torque
  • Estimated gain of 22.28 HP at 5,000 RPM
  • Estimated gain of 16.3 lb-ft of torque
  • High-density cross-linked polyethylene intake tube
  • Black intake tube finish
  • Oversized High-Flow Air Filter
  • Washable and reusable filter design
  • Red oiled cotton-gauze filter media
  • Left and right heat shields with heat barriers
  • Replaces the factory air filter and intake tube
  • Retains the factory mass airflow sensor
  • Stainless steel worm-gear clamps
  • Includes one coupler and three clamps
  • Mounting hardware included
  • Replacement air filter: K&N RP-6103
  • Typical installation time of 60 minutes or less

Important Notes

  • Fits 2020-2026 C8 Corvette Stingray coupes with the 6.2L LT2 engine. Excludes the Hard Top Convertible.
  • Installation reuses the factory mass airflow sensor, air-temperature sensor, and “F” antenna. Transferring the antenna requires cutting its attachment welds on the original airbox.
  • Inspect the filter every 25,000 miles. Cleaning intervals can reach 100,000 miles under normal highway conditions, with earlier service required in dusty environments.
  • Clean and re-oil the filter using K&N Recharger kit 99-5000 or 99-5050, sold separately.
  • Published horsepower and torque gains are estimates from a specific K&N dynamometer test; actual results vary by vehicle and operating conditions.
  • This system is not legal for sale or use in California on pollution-controlled motor vehicles. 

Recently Viewed