20-24+ C8 Corvette Spider 20x9" & 20x12" Wheel Set (Silver W/ Machined Mirror Face)(Includes Front & Rear) - Cray

Fits 2020+ C8 Corvette (Base & Z51 Models)

Description:

Give your 2020+ Chevrolet C8 Corvette a distinctive OEM-inspired performance appearance with the Cray Spider 20x9-inch front and 20x12-inch rear wheel set finished in Silver with Machined Mirror Face. Designed specifically around Corvette applications, the Spider combines lightweight performance-oriented construction with an open ten-spoke design that showcases the Corvette's brake hardware while providing a wider, more aggressive stance. This staggered package includes two 20x9-inch front wheels, Part Number 2090CRD385120S67, and two 20x12-inch rear wheels, Part Number 2012CRD525120S67. The front wheels use a +38mm offset, while the wider rear wheels feature a +52mm offset. Both sizes use the C8 Corvette's 5x120 bolt pattern and a 67.06mm center bore, giving these exact part numbers Corvette-specific dimensions rather than a generic multi-vehicle fitment. The Spider's styling centers around ten slender spokes extending outward from the deeply recessed center section toward the wheel's outer edge. The open design provides a clear view of the brake rotor and caliper assembly, making it particularly well suited to the C8 Corvette's performance-focused styling. The Silver with Mirror Cut Face finish adds contrast by combining a bright silver base with precision-machined spoke faces for a more dimensional appearance than a conventional single-color silver wheel. Cray designs its wheels specifically for Corvette applications, and the Spider is offered in vehicle-specific combinations rather than relying on adapters or oversized universal center bores. These C8-specific wheels feature a 67.06mm center bore and 5x120 bolt pattern, providing the proper hub dimensions for the intended application. The 20x9 front wheel features 6.50 inches of backspacing, while the 20x12 rear uses 8.55 inches of backspacing. Both carry a 1,250-lb load rating. This staggered sizing provides the C8 with a wider rear footprint while retaining a more moderate front width appropriate for the Corvette's mid-engine chassis. There is some conflicting published weight information for these wheels. One current wheel database lists the 20x9 at 26.35 lb and the 20x12 at 31.43 lb, while another specialty Corvette wheel retailer reports significantly lower approximate weights of 22.35 lb and 26.43 lb respectively. Because the 26.35/31.43-lb figures are corroborated by multiple current wheel databases—with Discount Tire independently listing the rear at 31.43 lb—I recommend using 26.35 lb front and 31.43 lb rear for catalog purposes. Unlike the previous Panthera package, this particular Spider setup uses the same 20-inch diameter at all four corners while increasing the rear width to 12 inches. This gives Corvette owners a performance-oriented staggered 20-inch package without stepping up to a 21-inch rear wheel. For C8 Corvette owners seeking an aftermarket wheel that retains a refined silver appearance while adding a wider stance and more aggressive spoke design, the Cray Spider 2090CRD385120S67 and 2012CRD525120S67 wheel package provides Corvette-specific sizing, proper hub dimensions, a substantial 1,250-lb load rating, and a distinctive Silver with Machined Mirror Face finish.

Key Features

• Cray Wheels Spider wheel set
• Complete staggered set of four wheels
• Includes two front and two rear wheels
• Front Part Number: 2090CRD385120S67
• Rear Part Number: 2012CRD525120S67
• Cray Spider Series
• Silver with Machined Mirror Cut Face finish
• Performance-oriented one-piece construction
• Open ten-spoke design
• Flow-formed aluminum construction
• Deeply recessed center section
• Corvette-specific staggered fitment
• Front size: 20x9 inches/ +38 Offset
• Front backspacing: 6.50 inches
• Front center bore: 67.06mm
• Front weight: approximately 26.35 lb each
• Rear size: 20x12 inches/ +52 Offset
• Rear backspacing: 8.55 inches
• Rear center bore: 67.06mm
• Rear weight: approximately 31.43 lb each
• Bolt pattern: 5x120
• Five-lug configuration
• Load rating: 1,250 lb per wheel
• Corvette-specific 67.06mm hub bore
• Complete four-wheel calculated weight: approximately 115.56 lb

Important Notes

• The Spider uses a ten-spoke design extending from a recessed center toward the outer wheel edge.
• Its open spoke layout is specifically designed to frame and expose the brake rotor and caliper assembly.
• Tires, TPMS sensors, lug nuts, and balancing weights are not included.
• Because these are aftermarket wheels, always test-fit wheels before mounting tires.
• Proper tire sizing is especially important on the C8 Corvette because the vehicle's ABS, traction-control, and stability-control systems depend on appropriate front-to-rear tire diameter relationships.
• Verify suspension, fender, liner, brake-caliper, spoke, and wheel-barrel clearance before final installation.
• Clearance should be rechecked on vehicles with aftermarket suspension, lowering components, larger brake systems, or other chassis modifications.
• Wheel fasteners should be tightened using the correct Chevrolet torque specification and tightening sequence.
• Final tightening should be performed with a calibrated torque wrench rather than relying on an impact wrench.
• Recheck wheel-fastener torque after the initial installation/break-in period.