16-24 Camaro, Performance Version, Lowering Spring Kit - BMR

FITS 2016-2024 CAMARO ( ALL MODELS )

DESCRIPTION:

Improve the stance, handling, and overall suspension performance of your 2016-2024 Chevrolet Camaro with the BMR Suspension Performance Lowering Spring Kit featuring Part Number SP041R. Designed for V8-powered sixth-generation Camaro applications, this complete set of four lowering springs lowers the vehicle approximately 0.75 inches in the front and 1.0 inch in the rear, creating a more aggressive stance while maintaining a balance between performance handling and comfortable street driving. BMR specifically engineers the SP041 for street-performance enthusiasts who use their Camaros across a variety of driving conditions. BMR manufactures the SP041 springs from chrome silicon high-tensile spring wire using a CNC-controlled cold-winding process. The CNC coiling equipment can adjust spring diameter during production, helping ensure consistent dimensions and matching spring characteristics from side to side. After winding, each spring is compressed solid twice at the factory to establish its permanent set and help prevent future sagging. The springs are then stress-relieved at 750 degrees Fahrenheit and shot-peened to reduce residual surface stresses and improve long-term durability. Unlike progressive-rate designs, the SP041 uses carefully tuned linear spring rates engineered to provide predictable suspension response. The increased support helps keep the Camaro flatter and more controlled during cornering while remaining compliant enough for comfortable street use. BMR computer-tests every individual spring—not simply a sample from each production batch—to verify spring height and rate. This extensive manufacturing and testing process allows BMR to provide a lifetime warranty against spring sag. Finished in BMR's signature Red powder coat for long-lasting protection and an unmistakable performance appearance, the SP041 provides a complete front and rear suspension upgrade while retaining the vehicle's conventional shock and strut configuration. BMR estimates installation at approximately 3-4 hours. For V8-powered 2016-2024 Camaro owners looking for a lowered stance, flatter cornering characteristics, and improved handling without sacrificing street manners, the BMR SP041 Performance Lowering Spring Kit provides a proven American-made solution.

Key Features

• BMR Suspension Performance Lowering Spring Kit
• Red powder coat finish
• Fits compatible 2016-2024 Chevrolet Camaro applications
• Designed specifically for V8-powered sixth-generation Camaros
• ZL1 compatible
• 1LE compatible
• Complete set of four (4) lowering springs
• Includes front and rear lowering springs
• Approximately 0.75-inch front drop
• Approximately 1.0-inch rear drop
• Performance-oriented lowered stance
• Designed to improve handling and ride quality
• Fine-tuned linear spring rates
• Linear spring design provides predictable suspension response
• Helps keep the vehicle flatter and more level through corners
• Engineered to retain comfortable street-driving characteristics
• Manufactured from chrome silicon high-tensile spring wire
• Cold wound using a CNC coiling machine
• CNC-controlled manufacturing for precise spring dimensions
• Springs compressed solid twice during manufacturing
• Permanent-set manufacturing process helps prevent spring sag
• Stress-relieved at 750 degrees Fahrenheit
• Shot-peened to reduce residual surface stresses
• Every spring individually computer tested
• Computer tested for accurate height
• Computer tested for accurate spring rate
• Designed for street-performance applications
• Approximately 3-4 hour installation time
• Designed in the USA
• Made in the USA

Important Notes

• Designed for V8-powered 2016-2024 Chevrolet Camaro applications.
• BMR specifically states that the SP041 was not engineered for V6 or 4-cylinder Camaros and has not been tested on those applications.
• Compatible with V8 Camaro applications, including ZL1 and 1LE configurations according to BMR.
• Includes four (4) springs for a complete front and rear installation.
• The SP041 uses linear spring rates rather than progressive spring rates.
• BMR designed the spring rates to provide increased cornering support while retaining comfortable street characteristics.
• Springs are manufactured from chrome silicon high-tensile spring wire.
• Each spring is cold wound using CNC-controlled manufacturing equipment.
• Every spring is compressed solid twice at the factory to establish its permanent set and help prevent sagging.
• Springs are stress-relieved at 750 degrees Fahrenheit.
• Springs are shot-peened as part of BMR's manufacturing process.
• Every individual spring is computer tested for accurate spring height and spring rate.
• BMR provides a lifetime warranty against spring sag.
• Red powder coating provides the SP041 with its distinctive appearance and a durable protective finish.
• BMR estimates installation time at approximately 3-4 hours.
• BMR designs and manufactures these springs in the USA.
• Lowering a vehicle changes suspension geometry and may affect alignment settings.
• A professional four-wheel alignment is recommended following installation.
• Inspect factory shocks, struts, upper mounts, spring isolators, bump stops, and related suspension components during installation and replace worn components as necessary.
• Vehicles equipped with aftermarket wheels and tires should have tire-to-fender and suspension clearance checked after lowering.
• Ground clearance will be reduced after installation.
• Professional installation is recommended, particularly because removal and installation of front suspension springs requires appropriate spring-compression equipment and procedures.

PRODUCT VIDEO: