-
16-24 Camaro 3.6L AirCharger Cold Air Intake - K&N Filters
K&N FiltersSale: $367.99Retail:16-24 Camaro 3.6L AirCharger Cold Air Intake - K&N Filters -
16-24 Camaro SS 6.2L Typhoon Cold Air Intake - K&N Filters
K&N FiltersSale: $419.99Retail:16-24 Camaro SS 6.2L Typhoon Cold Air Intake - K&N Filters -
16-24 Camaro 3.6L Intake Filter Kit - K&N Filters
K&N FiltersSale: $262.99Retail:16-24 Camaro 3.6L Intake Filter Kit - K&N Filters -
16-24 Camaro 2.0L AirCharger Cold Air Intake - K&N Filters
K&N FiltersSale: $367.99Retail:16-24 Camaro 2.0L AirCharger Cold Air Intake - K&N Filters
Description
FITS 2016-2024 CAMARO ( LS/LT MODELS )
16-24 Camaro 3.6L Typhoon Cold Air Intake - K&N Filters
FITS 2016-2024 CAMARO ( LS/LT MODELS )
Not for sale or street use in CA & CARB states
Installation Instructions
DESCRIPTION:
Bring a polished performance look and improved airflow to your Camaro V6 with the K&N Typhoon Cold Air Intake, part number 69-4535TP. Designed for 2016–2024 Chevrolet Camaro LS/LT models equipped with the 3.6L engine, this system replaces the factory airbox and intake tube with an oversized filter and mandrel-bent aluminum tubing. K&N’s dyno testing on a stock 2016 Camaro measured estimated gains of 21.33 horsepower at 5,900 RPM and 11.76 lb-ft of torque at 3,000 RPM, supporting stronger performance alongside a more noticeable intake sound. The aluminum tube features a bright mirrored finish, while the red oiled cotton-gauze filter can be washed and reused. A heat shield mounts in the original airbox location, and the supplied fittings reconnect the factory EVAP and crankcase ventilation lines. Installation transfers the original MAF sensor, uses the factory mounting grommets, and allows the decorative engine cover to be reinstalled. Couplers, clamps, and mounting hardware complete the assembly for a finished upgrade under the hood.
Key Features
- K&N 69 Series Typhoon Cold Air Intake
- Estimated gain of 21.33 horsepower at 5,900 RPM
- Estimated torque gain of approximately 11.8 lb-ft
- Mandrel-bent aluminum intake tube
- Bright mirrored finish
- Oversized red oiled cotton-gauze filter
- Washable and reusable filter media
- Heat shield and mounting bracket included
- Uses factory airbox mounting grommets
- Retains the original MAF sensor
- Reconnects factory EVAP and crankcase ventilation lines
- Two intake couplers included
- Replacement filter: RU-5107
Important Notes
- Fits 2016–2024 Chevrolet Camaro models with the 3.6L V6.
- Power figures reflect testing on a stock 2016 Camaro; individual results may vary.
- The factory sound-tube assembly is removed, and the remaining connection is capped using supplied components.
- Some trimming of the supplied heat-shield edge trim is required.
- K&N lists up to 100,000 miles between filter cleanings under normal highway conditions. Inspect every 25,000 miles and clean sooner in dusty environments.
- Service the filter with K&N Recharger kit 99-5000 or 99-5050, following the cleaning and re-oiling instructions.
- Retain the factory intake parts and periodically inspect system clearance and connection tightness.
- This intake is not legal for sale or use in California on pollution-controlled motor vehicles.
