16-24 Camaro Front Lower Control Arms, Double-Adjustable - BMR

FITS 2016-2024 CAMARO ( ALL MODELS )
Installation Instructions

DESCRIPTION:

Minimize front suspension flex, eliminate bushing deflection, and improve handling repeatability on your 2016-2024 Chevrolet Camaro with the BMR Suspension FLC363 Double-Adjustable Front Lower Control Arms. Designed as direct replacements for the Camaro's factory front radius rod arms, the FLC363 provides a substantially more rigid and performance-oriented connection between the chassis and front suspension while adding valuable adjustability for street, drag racing, and road racing applications. The factory sixth-generation Camaro uses aluminum front control arms with soft rubber bushings. While this design provides excellent isolation and comfort for normal street driving, BMR notes that the factory bushings can deflect significantly during hard braking and aggressive cornering. This movement can allow suspension geometry to change under load, reducing consistency and precision when the Camaro is driven near its limits. BMR addresses this weakness by manufacturing the FLC363 from heavy-duty 1-inch DOM steel tubing. The tubular steel construction is engineered to minimize the flex experienced by the factory radius rod arms while providing the durability needed for demanding performance use. This creates a more rigid front suspension link that better maintains its geometry as braking and cornering loads increase. Instead of the factory rubber bushings, the FLC363 utilizes heavy-duty Teflon-lined rod ends. These performance-oriented rod ends eliminate the bushing deflection associated with the factory components and allow the suspension to respond more directly to driver and road inputs. BMR specifically identifies improved durability and repeatability as key benefits, making the FLC363 particularly valuable for drivers seeking consistent suspension behavior under hard braking and through repeated corners. Another major advantage is the FLC363's double-adjustable design. Both ends of the arm can be adjusted, allowing suspension settings to be fine-tuned based on the vehicle's setup and performance requirements. The adjustable configuration also allows changes to be made without completely removing the control arms from the vehicle, making suspension setup and track-side tuning more convenient. The FLC363 is a 100% bolt-on upgrade that installs using the Camaro's existing mounting locations. BMR estimates installation at approximately 1-2 hours. Once installed, a professional alignment is recommended so the adjustable arms can be properly configured and the Camaro's front suspension geometry can be optimized for its intended use. Available in Red or Black Hammertone powdercoat finishes, the FLC363 combines functional suspension performance with durable corrosion protection and BMR's recognizable appearance. Proudly designed and manufactured in the USA, these double-adjustable front lower control arms are an excellent upgrade for sixth-generation Camaro owners looking for greater front-end precision, reduced suspension deflection, and improved consistency on the street, drag strip, autocross course, or road course.

Key Features

• BMR Suspension Front Lower Control Arms
• Replaces the factory front radius rod arms
• Double-adjustable design
• Allows suspension geometry to be fine-tuned for performance needs
• Manufactured from heavy-duty 1-inch DOM steel tubing
• Heavy-duty tubular steel construction
• Heavy-duty Teflon-lined rod ends
• Replaces compliant factory rubber bushings
• Minimizes front radius rod flex
• Eliminates bushing deflection
• Helps maintain more consistent suspension geometry under load
• Improves suspension repeatability and durability
• Helps provide more consistent response under hard braking and during aggressive cornering
• Performance-oriented alternative to factory aluminum control arms
• 100% bolt-on design
• Uses factory mounting locations
• Designed for street performance, drag racing, and handling/road racing applications
• Approximately 1-2 hour installation time
• Proudly designed in the USA
• Proudly made in the USA

Important Notes

• Replaces the front radius rod arms on the Camaro.
• Sold as a set of front lower control arms.
• The factory Camaro arms are aluminum and utilize soft rubber bushings designed partly around ride comfort and isolation.
• Factory rubber bushings can deflect under hard braking and cornering.
• Because rod ends provide substantially less isolation than factory rubber bushings, increased noise, vibration, and harshness may be experienced compared with the stock suspension.
• The reduced compliance makes FLC363 particularly appropriate for performance applications where suspension precision and repeatability take priority over factory-like isolation.
• A professional wheel alignment is strongly recommended after installation or adjustment of the FLC363.
• Suspension settings should be selected according to ride height, tires, other suspension modifications, and intended vehicle use.